Skip to content Groundwork Design Co.Want a design?Custom patio, wall, deck and yard plans, drawn by builders. Anywhere in the U.S. From $349.Start here
LOCK HAVEN, PA · PA HIC #PA212584 · INSURED FREE ESTIMATES · CALL OR TEXT
PAGE

Home / Weed identification / Saltcedar (Tamarisk)

US weed ID · Invasive shrub

Saltcedar (Tamarisk)

Tamarix ramosissima · Tamaricaceae (tamarisk family)

  • Woody perennial
  • Shrub or small tree
  • Non-native

If a feathery, gray-green thicket with plumes of tiny pink flowers lines a river, pond or irrigation ditch in the West, it's very likely saltcedar.

How to get rid of itAll weeds A–Z
Saltcedar (Tamarisk) (Tamarix ramosissima) growing — weed identification photo
Photo: Jerzy Opioła · CC BY-SA 3.0 · Wikimedia Commons

What is saltcedar?

Saltcedar is a fast-growing shrub or small tree from Eurasia that was planted across the West in the 1800s for ornament, windbreaks and erosion control. By around 1850 it had escaped into western waterways, and it now lines rivers and wetlands throughout the West and Southwest. saltcedar identification starts with the foliage and flowers: feathery twigs covered in tiny overlapping scales, and dense spikes of small pink flowers in spring and summer.

Its effects on rivers are significant. Thickets trap sediment and narrow channels, which can raise flood risk, and dense stands are poor habitat for many mammals, reptiles and cavity-nesting birds. Saltcedar pulls salts up through its roots and sheds them through its leaves, leaving a salty layer that discourages other plants. The plants are also flammable and can carry fire into streamside areas not adapted to it.

Saltcedar identification: what to look for

From a distance, look for a dense, misty-looking thicket with fine, drooping branches next to water. Up close, check that the 'needles' are really tiny overlapping scales, look for pink flower spikes at the branch tips, and count the petals if you can, since that separates saltcedar from a close relative.

  • Leaves: Tiny scales that overlap tightly along the twigs, with pointed tips and a bluish-green color; they drop in autumn.
  • Bark: Smooth and reddish-brown on young stems, becoming furrowed and ridged with age.
  • Flowers: Tiny, pink to white, mostly with five petals, five sepals and five stamens, crowded into slender spikes.
  • Form: A multi-stemmed shrub or small tree, mostly 5 to 20 feet tall, forming dense clonal thickets.
  • Seeds: Minute seeds topped with a tuft of hair, released from small capsules in huge numbers.
  • Roots: Deep, branching roots that reach groundwater and sprout new stems.
Saltcedar (Tamarisk) (Tamarix ramosissima) — identification photo
Photo: Andrey Zharkikh from Salt Lake City, USA · CC BY 2.0 · Wikimedia Commons
Saltcedar (Tamarisk) (Tamarix ramosissima) — identification photo
Photo: Jerzy Opioła · CC BY-SA 3.0 · Wikimedia Commons

Where it grows in the United States

Saltcedar and its tamarisk relatives now grow in every western and southwestern state, with the worst infestations along rivers and reservoirs in the desert Southwest. The most common invasive form, often a hybrid between saltcedar and Chinese tamarisk, ranges from Oklahoma to Washington and California. It has also moved north into Montana, where it was first found around 1960 in the Yellowstone and Bighorn drainages.

It grows on river and pond margins, washes, ditches, roadsides, sand dunes and desert springs. It does best in alkaline soil but tolerates salt, flooding, drought, desert heat, freezing and fire once established. Native cottonwoods can outgrow and eventually shade it out where they get a start, since saltcedar does not tolerate shade.

Saltcedar look-alikes

A few plants get mixed up with it:

  • Smallflower tamarisk (Tamarix parviflora): A very similar non-native tamarisk. Its pink flowers mostly have four petals, four sepals and four stamens instead of five, and it grows a little shorter.
  • Athel tamarisk (Tamarix aphylla): A larger tree, up to about 40 feet, that keeps its foliage year-round. Its scale leaves barely overlap and look like tiny segments of the twig.
  • Junipers (redcedars) (Juniperus spp.): Saltcedar's scaly twigs resemble cedar foliage, which is where the name comes from, but saltcedar drops its leaves in fall and blooms in pink spikes.

How to get rid of saltcedar

Pulling, digging and mowing: Mowing, chopping, burning, disking and hand pulling usually suppress saltcedar rather than kill it, because it resprouts vigorously from the root crown. On large, severe infestations, root plowing 12 to 18 inches deep can sever the crowns and give about 90 percent control, working best in hot, dry weather, but it destroys other vegetation too, so it is used as part of a full restoration plan. Pile and burn or haul off the cut tops so they cannot root. In most cases, cutting is paired with an immediate herbicide treatment on the stump. Expect regrowth and plan to return for several years.

Cultural control matters most, because the right conditions keep it from coming back.

  • Replant treated sites with native willows and cottonwoods where the water table allows; cottonwoods can eventually overtop saltcedar.
  • Watch for weeds such as whitetop, houndstongue and Canada thistle that often move in after saltcedar is removed.
  • Goats may help on stands that have been cut or burned, but saltcedar has little feed value, so grazing is a minor tool.
  • Leaf beetles have defoliated saltcedar in parts of the West, but their use is limited and controversial because the endangered southwestern willow flycatcher nests in saltcedar. Do not move beetles yourself.

Herbicides: Herbicides are the core of saltcedar control. Imazapyr is the most widely used, applied to foliage in late summer or early fall, alone or with glyphosate; both are nonselective, so broadcast treatment suits sites without native shrubs and trees. For cut-stump treatment, cut stems within about 2 inches of the ground and apply triclopyr, imazapyr or glyphosate to the cut edge within minutes; fall is a good time for large stems. Basal bark treatment with triclopyr works on intact stems under about 5 to 6 inches thick. Keep triclopyr and imazapyr out of open water and below the high-water mark, and be careful on permeable soils with shallow groundwater. Retreat resprouts 4 to 12 months later. Use only products labeled for the site, especially at the water's edge, and follow the label; the label is the law. If you hire someone to spray, make sure they hold your state’s pesticide applicator license; the rules for each state are in our pesticide applicator license guide.

Keeping it from coming back

Do not plant tamarisk as an ornamental or windbreak. Seed sprouts quickly on wet, bare sand and mud, so check pond, ditch and river shorelines after high water and deal with seedlings while they are small.

Keep native streamside vegetation healthy; established cottonwoods can outcompete and shade out saltcedar. After control work, monitor for root sprouts and replant natives promptly.

Questions we get about saltcedar

Why is it called saltcedar?

Its scaly twigs resemble cedar foliage, and the plant draws salt from the soil and releases it through its leaves, leaving a salty layer on the ground beneath.

Does saltcedar really use more water than native trees?

Early studies said so, but newer research with better measurement methods found its water use is similar to native streamside vegetation. It still degrades habitat and narrows channels.

Can I just cut saltcedar down?

Cutting alone triggers heavy resprouting from the roots. Treat the fresh stump with a labeled herbicide within minutes, then check for regrowth over the next year.

Weeds taking over a bed, slope or wet spot?

In central Pennsylvania, Muthler rebuilds beds, regrades and drains wet ground, clears overgrown brush and builds patios and walls across Clinton, Lycoming, Centre and Union counties. Outside central PA? Groundwork Single Space ($349) is a scaled 2D plan of one area with plants matched to your hardiness zone, designed remotely.

Get a free estimateSee landscape design

Similar weeds

← Back to all weeds A–Z