Skip to content Groundwork Design Co.Want a design?Custom patio, wall, deck and yard plans, drawn by builders. Anywhere in the U.S. From $349.Start here
LOCK HAVEN, PA · PA HIC #PA212584 · INSURED FREE ESTIMATES · CALL OR TEXT
PAGE

Home / Weed identification / Dalmatian Toadflax

US weed ID · Pasture & rangeland weed

Dalmatian Toadflax

Linaria dalmatica · Scrophulariaceae (figwort family)

  • Perennial
  • Broadleaf
  • Non-native

If tall stems lined with waxy, heart-shaped leaves that hug the stem carry bright yellow snapdragon flowers, you are looking at Dalmatian toadflax.

How to get rid of itAll weeds A–Z
Dalmatian Toadflax (Linaria dalmatica) growing — weed identification photo
Photo: william_stephens · CC BY 4.0 · Wikimedia Commons

What is Dalmatian toadflax?

Dalmatian toadflax is a showy Mediterranean perennial that escaped from cultivation, where it was grown as an ornamental and for dye and medicine, and now spreads across dry range and roadsides in much of the West. Dalmatian toadflax identification is simple in bloom: yellow snapdragon flowers above broad, waxy leaves that wrap the stem. Behind the pretty flowers are deep roots and a seed bank that lasts about a decade.

It crowds out grasses and natives, especially shallow-rooted perennials and winter annuals, and dense patches can cut grass production about two and a half times. Cattle mostly avoid it, and grazing without enough rest favors it. Patches can persist more than 13 years because new stems keep rising from root buds.

Dalmatian Toadflax identification: what to look for

Use the leaves, since the flowers look nearly identical to yellow toadflax. Look for broad, heart-shaped, stalkless leaves that clasp the stem and carry a waxy, whitish-to-bluish coating. In fall and early spring, first-year plants may show low, sprawling shoots before upright stems appear.

  • Leaves: Broad, heart- or egg-shaped, 3/4 to 2 inches long, clasping, thick, hairless and waxy.
  • Stems: Stout and upright, branching near the top; robust stems can pass 3 feet.
  • Flowers: Bright yellow, two-lipped snapdragons with an orange center and a straight spur roughly 1/2 to 1 inch long.
  • Seed capsules: Egg- to barrel-shaped, about 1/4 inch long, packed with tiny winged seeds.
  • Roots: Deep taproot plus thick, pale, creeping roots that sprout new stems.
Dalmatian Toadflax (Linaria dalmatica) — identification photo
Photo: normherr · CC0 · Wikimedia Commons
Dalmatian Toadflax (Linaria dalmatica) — identification photo
Photo: monkeyjodey · CC0 · Wikimedia Commons

Where it grows in the United States

USDA's fire effects review lists it in 31 states, from the Pacific coast across the Rockies and Great Plains to the Midwest and New England, plus most Canadian provinces. It is most competitive in the dry-summer Northwest and Intermountain West, especially on south- and southeast-facing slopes, and grows to about 9,400 feet in Colorado. In Montana it has been reported in all but nine counties.

It favors well-drained, coarse soils and open sites, including grasslands, savannas, open forest, roadsides, abandoned fields, gravel pits and steep, erosion-prone slopes. Grazing without rest, mining and road building weaken plant cover and let it in. Its seedlings compete poorly, so a healthy grass stand blocks most new plants.

Dalmatian Toadflax look-alikes

A few plants get mixed up with it:

  • Yellow toadflax (Linaria vulgaris): Nearly identical flowers, but narrow, linear leaves roughly 1/12 to 1/4 inch wide that do not clasp the stem, and a shorter spur.
  • Narrow-leaved Dalmatian toadflax (Linaria genistifolia): A close relative that is also regulated as noxious; as its name says, its leaves are narrow rather than broad and heart-shaped. In Montana only the broad-leaved species is known to be invasive.

How to get rid of Dalmatian toadflax

Pulling, digging and mowing: Hand pulling can eradicate small patches if you keep at it for five or six years; it works best in sandy or moist soil, where more root comes up. In one Washington natural area, a decade of yearly pulling in early June, with a late-June follow-up, cut flowering stems by 90 to 95 percent across 28 acres. Mowing or cutting stops seed for that year but does not kill roots, and cut stems can resprout. Tillage needs at least two years of intensive work, 8 to 10 cultivations the first year and 4 to 5 the second; casual tilling just spreads root pieces. Burning does not kill roots and can increase growth and seed.

Cultural control matters most, because the right conditions keep it from coming back.

  • Graze sheep or goats: trained sheep have eaten nearly 90 percent of the plants with little effect on grasses, and both reduce seed. Hold animals on weed-free feed for several days before moving them to clean ground.
  • Release the toadflax stem-mining weevil, Mecinus janthinus, the most promising biocontrol agent, credited with declines in southern British Columbia and northern Washington. Do not graze where you rely on it, since grazing removes the stems it lives in.
  • Reseed with competitive grasses; crested, intermediate and thickspike wheatgrass reduced it in trials. Keep livestock off new seedings for at least two growing seasons.
  • Light infestations of about 10 or fewer flowering stems per square meter can often be handled with grazing or insects alone.

Herbicides: Its waxy leaves shed spray, so timing matters. USDA NRCS guidance names imazapic, metsulfuron and picloram as options and notes chlorsulfuron is effective, though it was not labeled for this weed at the time. Treat fall regrowth or spring growth up to early bloom, when the wax layer is thinner; picloram fits spring to early bloom, imazapic late-fall regrowth, and some treatments have held it for up to three years. Many common broadleaf herbicides, including 2,4-D, triclopyr and fluroxypyr, have proven ineffective, and glyphosate killed surrounding plants without controlling the toadflax. Because seeds last about a decade, expect to retreat every few years. Use only a product whose label covers your site and this weed; the label is the law. If you hire someone to spray, make sure they hold your state’s pesticide applicator license; the rules for each state are in our pesticide applicator license guide.

Keeping it from coming back

Do not plant toadflaxes, and pull any that appear in beds; this species escaped from cultivation in the first place. In Washington it is illegal to sell or transport plants or seed.

Keep range and pasture cover healthy, avoid continuous grazing and limit bare, disturbed soil. Hold cattle about 6 days and sheep about 11 days on clean feed after leaving infested ground so swallowed seed passes, and scout roadsides and disturbed slopes each spring.

Questions we get about Dalmatian toadflax

How do I tell Dalmatian toadflax from yellow toadflax?

Look at the leaves. Dalmatian has broad, heart-shaped, waxy leaves that clasp the stem; yellow toadflax has narrow, grass-like leaves that do not.

Is Dalmatian toadflax poisonous?

It is not considered a significant risk. It contains mildly toxic alkaloids, but no poisoning has been seen in western livestock, and sheep eat it readily.

Can the two toadflaxes cross?

Yes. They hybridize in the lab, so natural hybrids are expected and may show traits of both.

Why did my spray fail?

The waxy leaves resist absorption and many common broadleaf herbicides do not control it. Use an active ingredient known to work, timed for spring before full bloom or fall regrowth, and plan follow-ups.

Weeds taking over a bed, slope or wet spot?

In central Pennsylvania, Muthler rebuilds beds, regrades and drains wet ground, clears overgrown brush and builds patios and walls across Clinton, Lycoming, Centre and Union counties. Outside central PA? Groundwork Single Space ($349) is a scaled 2D plan of one area with plants matched to your hardiness zone, designed remotely.

Get a free estimateSee landscape design

Similar weeds

← Back to all weeds A–Z