4×50 paver walkway: materials, cost and layout
Home / Sizes / 4×50 paver walkway
Paver walkways · size guide
4×50 paver walkway
What a 4×50 paver walkway takes to build: the materials list, what fits on it, how long it takes, and what it costs installed.
- 200 sq ft
- 571 6×9 pavers
- 7.2 tons of stone and sand
Materials for a 4×50 paver walkway
| Item | Quantity | Notes |
|---|---|---|
| Paved area | 200 sq ft | length × width |
| Pavers to order | 214 sq ft | 7% extra for cuts and breakage (571 pieces if you use a 6 × 9 in paver) |
| Base: crushed stone (2A modified / crusher run) | 6.2 tons | 6 in compacted in 2–3 in lifts |
| Bedding sand (concrete sand) | 1 tons | 1 in, screeded, never compacted before the pavers go down |
| Polymeric joint sand | 4 bags (50 lb) | about 60 sq ft per bag on standard joints |
| Edge restraint | 108 ft | all the way around, spiked every 12 in |
| Filter fabric under the base | 230 sq ft | keeps the base out of the soil |
| Soil dug out | 7.5 cu yd | about 9 in deep, plus room for the base to extend 6 in past the pavers |
Quantities use common rules: crushed stone at about 1.4 tons per cubic yard plus 20% for compaction, concrete sand at about 1.35 tons per cubic yard. Your stone yard can convert to their product. Base depths assume normal soil in a freeze-thaw climate; soft or wet soil needs more.
Good to know
- At 4 ft wide, two people can walk side by side.
- When a paver job fails, it is almost always the base, not the pavers. The stone in the list above is the part not to skimp on.
Get a plan drawn for your yard
- Groundwork Design Co., our design studio, draws a 4×50 paver walkway for your actual yard from photos and measurements
- Scaled plan with dimensions, material list and scope any contractor can price
- Single Space plan from $349
- We build it ourselves in Clinton, Lycoming, Centre and Union counties
- Fixed price, 33% down, 6-month workmanship warranty
- Closest plan: Front Walk & Steps
- Order the list above, plus 5–10% if your yard has curves
- Call 811 before you dig, two business days ahead
- Rent a plate compactor; compact every 2–3 in of base
Questions
How many pavers for a 4×50 paver walkway?
Order about 214 sq ft of pavers. With a 6 × 9 in paver that is roughly 571 pieces. Larger pavers mean fewer pieces for the same square footage.
How much gravel do I need for a 4×50 paver walkway?
6.2 tons of crushed stone for the base and 1 tons of bedding sand. Stone is usually sold by the ton; ask the yard for 2A modified or crusher run.
How much does a 4×50 paver walkway cost installed?
We build a 4×50 paver walkway in central Pennsylvania for about $13,250 ($66 per sq ft), including excavation, base, materials and cleanup. Prices elsewhere depend on local labor and stone, so the reliable way to price it where you live is a scaled plan and two or three local bids on the same plan.
How long does it take to build?
A two- or three-person crew builds a 4×50 paver walkway in about 3 working days, most of it digging and building the base. A careful DIY build usually takes two to three times as long.
Read next
Nearby sizes
4×40 paver walkway
5×30 paver walkway
4×30 paver walkway
3×30 paver walkway
4×20 paver walkway
Paver walkway cost guide: real fixed prices, what moves the price →
Muthler Landscaping & Construction LLC · 913 Bellefonte Ave, Lock Haven, PA 17745 · (570) 397-9800 · PA HIC #PA212584. Installed prices are ours in central Pennsylvania (pricing v1).