Home / Pest identification / Leaf spot and melting out
Pest ID · Lawn diseases
Leaf spot and melting out
Drechslera poae · Fungal disease
- Kentucky bluegrass
- Cool, wet spring
- Can thin whole lawns
Leaf spot and melting out are two stages of the same fungus attack. It starts as purple-bordered spots on grass blades in cool, wet spring weather, then can rot the crowns and thin a Kentucky bluegrass lawn.
How to manage itAll pests and diseasesWhat is leaf spot and melting out?
Leaf spot and melting out are caused by fungi once lumped under the name Helminthosporium. Penn State says the spring disease of Kentucky bluegrass is caused by Drechslera poae, and a summer form on bluegrass and fine fescues is caused by Bipolaris sorokiniana. Other relatives cause net blotch on ryegrass and fescue, brown blight on ryegrass, and red leaf spot on bentgrass.
Penn State notes every cool-season grass has at least one of these diseases, but Kentucky bluegrass and perennial ryegrass are hit hardest. The leaf spot stage alone does little harm. The real damage comes when spores wash down to the crowns and roots and rot them. That melting-out stage can thin large areas of a lawn, usually in late spring or early summer.
The good news is that resistance works. Penn State calls planting resistant varieties the most important cultural step, and Missouri Extension says most newer Kentucky bluegrass cultivars have moderate to high resistance. Lawns seeded with older, cheap varieties suffer the most.
Symptoms and signs
- Small oval spots on the blades with tan or light gray centers and dark purple to brown borders
- Yellowing around the spots; whole blades may turn yellow, tan or brown
- Lawn looks off-color and blotchy from a distance, with no clear circles
- Later, crowns and roots rot brown to black and the turf thins out badly (melting out)
- Plants with rotted crowns turn pale green or yellow, then straw colored, as weather warms
Leaf spot and melting out identification: what to look for
- Symptoms: Small brown or purple spots that grow into oval lesions with tan or light gray centers and dark purplish-red to brown borders. Yellowing may surround them. Lesions can spread across the whole blade.
- Symptoms: Melting out: crowns, rhizomes and roots rot brown or black. Plants first look pale green or yellow, like they need nitrogen, then die and turn straw colored, leaving uneven thin or dead areas.
- Spores: Dark, cigar-shaped spores form on infected tissue. Penn State says they can be seen only under a microscope.
- Timing: Spring leaf spot peaks in April and early May in Pennsylvania during cool, wet, overcast weather. Penn State says the summer form likes warm (68 to 95°F) wet weather. Missouri Extension notes the spring form can return in fall.
Disease cycle
The fungi survive winter in crowns, roots, thatch and dead grass, and in small spots on leaves. In cool, wet spring weather, rain or irrigation splashes spores onto new leaves, where they infect and make new spots. Several rounds of spotting happen through spring as wind, water and mowers spread the spores. As spores wash down to the crowns and roots, melting out begins, usually by late spring or early summer. UC IPM notes the melting-out fungus may also be carried on seed.
When to look: Look for leaf spots from late March through May, especially after cool, cloudy, rainy weeks. Watch for thinning (melting out) in late spring and early summer. The summer leaf spot form shows in July and August during warm, wet spells.
Leaf spot and melting out look-alikes
A few things get mixed up with it:
- Gray leaf spot (Pyricularia oryzae): Purdue says leaf spot on perennial ryegrass closely resembles gray leaf spot. Gray leaf spot is a hot, humid late-summer disease with gray, fuzzy spots in wet weather.
- White grub damage: Missouri Extension lists grub damage as a look-alike for melting out. Check the soil under thin areas for grubs, and check the blades for the dark-bordered spots of leaf spot.
- Nitrogen deficiency: Crown-infected plants turn pale green to yellow, like hungry grass. Check the blades for oval spots with dark borders.
How to manage leaf spot and melting out
Cultural control
- Go easy on nitrogen in early spring. Penn State suggests only a moderate feeding then; Purdue says to do most feeding in fall.
- Do not starve the lawn either. Missouri Extension says a balanced program lowers severity.
- Mow high. Purdue says not below 2 inches on home lawns; Penn State suggests 2.5 to 3 inches in spring.
- When summer watering is needed, water deeply and less often, between midnight and early morning.
- Avoid late-afternoon and evening watering in July and August.
- Reduce thatch, shade and soil compaction.
Chemical control
Missouri Extension says fungicides are not warranted if leaf spot caused no real injury in past years, and UC IPM says they should not be needed in most cases with resistant cultivars and good care. Purdue says they may be needed when severe outbreaks come back in the same place year after year. Timing matters: sprays work best preventively or at the first sign of leaf spots, and once melting out and crown rot start, control is very hard. Extension guides list strobilurin (QoI), dicarboximide and contact fungicides among the options. Use only products labeled for this use; the label is the law.
Use only products labeled for this disease and this site; the label is the law. For trees, work with an ISA Certified Arborist. If you hire someone to apply pesticides, make sure they hold your state’s pesticide applicator license; the rules for each state are in our pesticide applicator license guide.
Prevention
- Seed or overseed with resistant Kentucky bluegrass and perennial ryegrass cultivars. Check NTEP ratings.
- Use a blend of three or more resistant bluegrass cultivars, as Missouri Extension advises.
- Avoid older types Missouri Extension names as susceptible, such as 'Park', 'South Dakota' and 'Kenblue'.
- Overseeding thinned areas with resistant varieties is the cheapest long-term fix, per Purdue.
When to call a pro
If melting out thins the same lawn badly every spring even after you have switched mowing and feeding habits, talk to a licensed pesticide applicator about preventive timing, and plan to overseed with resistant varieties. See our pesticide applicator license guide.
Related guides: Weed identification guide · All pests and diseases
Questions about leaf spot and melting out
What is the difference between leaf spot and melting out?
They are stages of the same attack. Leaf spot is spots on the blades. Melting out is when the fungus reaches the crowns and roots and the turf thins out.
Why does my bluegrass lawn get this every spring?
Often it is the grass variety. Penn State says susceptible cultivars, common in cheap seed mixes, get hurt every year. Overseeding with resistant varieties is the long-term fix.
Should I fertilize heavily in spring to green it up?
No. Heavy early-spring nitrogen makes leaf spot worse. Purdue suggests doing most of your feeding in fall.
Can I still save a lawn that is melting out?
Recovery depends on regrowth or overseeding. Penn State says spraying at the melting-out stage usually helps little.
How high should I mow?
Higher is better. Purdue says not below 2 inches on home lawns, and Penn State suggests 2.5 to 3 inches in spring.
Lawn left bare, soggy or uneven?
We don’t do pest control, spraying or lawn treatments. In central Pennsylvania, Muthler rebuilds beds, fixes drainage and wet spots, regrades and builds patios and walls across Clinton, Lycoming, Centre and Union counties. Outside central PA? Groundwork Single Space ($349) is a scaled 2D plan of one area with plants matched to your hardiness zone, designed remotely.
Get a free estimateSee landscape designSimilar pests and diseases
Pesticides: always read and follow the product label; the label is the law. Applicator licensing rules vary by state.
Muthler Landscaping & Construction LLC · 913 Bellefonte Ave, Lock Haven, PA 17745 · (570) 397-9800 · PA HIC #PA212584