Free tool · from a working excavation crew
Driveway cost calculator
Enter your driveway’s length and width and pick a material to get a low-to-high installed price range, using one national cost source so the numbers line up from material to material.
These are national ranges; local quotes vary; get a written quote. The ranges come from HomeGuide’s driveway cost guide, which prices new driveways per square foot installed.
Heated driveways ($12 to $28 per sq ft installed in our cost source), stamped or colored finishes (an added $8 to $18 per sq ft), excavation, aprons and culvert pipes aren’t in this calculator; ask for them as separate lines on a written quote.
Check the highlighted box: the driveway size has to be greater than zero.
National ranges; local quotes vary; get a written quote.
Regrading the drive or fixing standing water? Grading and drainage concepts start with Full Yard ($895), which covers the backyard; Build-Ready ($1,795) covers front and back.
How it works
Driveway area = length × width, in feet, or the total square feet you enter. For a curve, a turnaround or a flared apron, measure it in rectangles and add them up.
Low = area × the low end of the material’s installed price per square foot. High = area × the high end. Every material comes from the same HomeGuide guide.
Each add-on you pick = area × its low and high price per square foot from the same source, added to both ends of the range. Removal assumes the old driveway is the same size as the new one.
50 × 12 ft = 600 sq ft · asphalt: 600 × $3 = $1,800 · 600 × $7 = $4,200
Add removal of the old drive: 600 × $1 = $600 · 600 × $3 = $1,800
Range: $2,400 to $6,000, about $4 to $10 per sq ft all in
Related: the gravel calculator for stone tons, the concrete calculator, the concrete guide, and our cost guides.
Questions
How much does a driveway cost per square foot?
HomeGuide’s driveway cost guide says a new driveway costs $3 to $12 per square foot to install, widen or extend. By material, it lists gravel at $1 to $3 installed, chip seal (tar and chip) at $2 to $5, asphalt paving at $3 to $7, plain gray concrete at $4 to $8 and pavers at $10 to $30 installed.
What is the cheapest driveway material?
Gravel, at $1 to $3 per square foot installed, followed by chip seal, also called tar and chip, at $2 to $5, in HomeGuide’s figures.
Is asphalt cheaper than concrete for a driveway?
Usually, but the ranges overlap. HomeGuide lists asphalt at $3 to $7 per square foot and plain gray concrete at $4 to $8. For a 24 by 24 foot two-car driveway (576 sq ft), that’s about $1,728 to $4,032 for asphalt and $2,304 to $4,608 for concrete.
How long does a tar and chip driveway last?
HomeGuide says chip seal, also called tar and chip, lasts 7 to 10 years and costs $2 to $5 per square foot installed. It’s layers of stone aggregate spread over hot liquid asphalt.
Does the estimate include grading or tearing out the old driveway?
Only if you add them. HomeGuide prices grading and site prep at $5 to $8 per square foot and removing an old driveway and hauling the debris at $1 to $3 per square foot. Soft or wet ground, long hauls and drainage pipes under the drive are quoted on site.
Groundwork Design Co. · designed by builders
Get the grading drawn before you collect quotes
Single Space ($349): a scaled site plan with the layout, sizes, materials and plants, plus a planting list. Full Yard ($895) adds a dimensioned hardscape sheet and a grading and drainage concept. Build-Ready ($1,795) adds construction details and a quantity takeoff. Full Yard covers the backyard; for a front driveway, choose Build-Ready.
See design packagesAll free calculatorsIn central PA? We handle excavation, grading and site work from Lock Haven to State College and Williamsport. See our excavation and site work and hardscaping.
Muthler Landscaping & Construction LLC · 913 Bellefonte Ave, Lock Haven, PA 17745 · (570) 397-9800 · PA HIC #PA212584.